Entry level NOS DAC using 1 DACTWO transient chip per channel.
Analogue volume control with amplification for headphones!
Due to chip shortage, Dac 3 option is temporarily not available!
The Amethyst is our entry model NOS DAC with volume control using our praised forward correction technology. As a result music will be more exiting as details on very low levels will be audible. The Amethyst can meet the best systems today in terms of sound quality as it borrows all the good things from our top models. In addition we have implemented a powerful headphone amplifier. The Amethyst is using two Transient R2R ladder DACTWO chips. The result of this process is an extremely fast and accurate behavior and brings listening experience on a much higher level. Despite the fact that both DACTWO chips are built on the same board an extremely high channel separation of 110 dB is realized. This contributes to flawless positioning of instruments.
The headphone amplifier will drive impedance down to 16 Ohms and gets his power from a powerful 30VA power supply. When the Amethyst is used as a DAC this power will be available for the DAC only. Even though the Amethyst is a small ‘mini’ integrated design, incorporating both Digital and Analogue processing. This together with an extremely low level noise floor of -145dB @ 2V RMS, indicates how this fine detail retrieval is made possible. The Amethyst can also be used as a stand-alone DAC. Fixed level output is available, direct from the DACTWO chips as no output stage is necessary. Headphone volume control is designed to power low impedance models down to 16 Ohms. When headphones are connected, volume control becomes active and when disconnected, the Analogue outputs become active with volume control muted.
Non EU? Tax will be excluded after entering delivery address on checkout.
- Digital to Analog Converter type:
- Non Oversampling.
- Audio bit depth (Resolution):
- Correction type:
- Forward (FPGA) corrected.
- Metrum DACTWO Transient chips per channel:
- Noise floor:
- -145 dB.
- Output impedance:
- RCA 100 Ohm, Headphone connection 0.001 Ohms.
- 1x 6.35mm jack on the front, 2x RCA on the back (stereo).
- 1x Optical, 2x Coax, 1x USB or I²S.
- Total harmonic distortion:
- 0.006% THD.
- Sampling rate via optical input:
- 44.1 - 96 kHz.
- Sampling rate via coax and AES/EBU input:
- Coax: 44.1 -192 kHz.
- Sampling rate via USB input:
- 44.1 - 384 kHz.
- Product dimensions:
- 24 x 19 x 6 cm.
- Product weight:
- Remote controller: