With the new I²S over HDMI module you can easily connect your Metrum DAC to I²S source devices that make use of the HDMI connector. This module fits in the Jade, Onyx and Amethyst DAC. For connecting HDMI to the Adagio or Pavane DAC, please order the Metrum I²S-HDMI module for Adagio & Pavane.
Metrum I²S-HDMI module for Jade & Onyx
$128.94
Tax included
With the new I²S over HDMI module you can easily connect your Metrum DAC to I²S source devices that make use of the HDMI connector. This module fits in the Jade, Onyx and Amethyst DAC. For connecting HDMI to the Adagio or Pavane DAC, please order the Metrum I²S-HDMI module for Adagio & Pavane.
I²S is the best-sounding and most transparent connection method we know for digital audio.
This new module plugs into our DAC products, and can be fitted by the user. You can change your setup to I²S over HDMI when your streamer or transport has this connection. Placement is practically a Plug and Play procedure; as with all electronics, always touch and hold the chassis of your DAC while placing the module to prevent static electricity. Also make sure you properly align the HDMI connector with the cutout in the back panel.
No more hassle with custom made break-out cables:
- The new module has jumpers to change data pin-polarity where needed.
- With the 4 onboard jumpers the Left and Right channel (LRCLK jumpers) and audio signal polarity (SDATA jumpers) can be switched.
A handy table in the Attachments section shows which jumper settings to make before placing the module. If your brand is not listed, start with the 1A, 2B, 3A, 4B setting. You can then switch channels (1B, 2A) or audio signal polarity (3B, 4A) using the jumpers.
Please note: for Jade, Onyx and Amethyst, 2 versions of motherboard exist. One with and one without a black 4-pin power connector under the input module slot. If your DAC does not have this 4-pin connector, your device needs to be modified by Metrum to accept the I²S-HDMI module. Then, switching between I²S and USB inputs is not a plug and play process. Fill in and print an RMA form, contact us, and send your Jade, Onyx or Amethyst for modification.
Contact customer service if you would like assistance in configuring or placing the new module in your Metrum Acoustics product.
You can also send your Metrum DAC to our factory in The Netherlands, where for a friendly price our engineers will do it for you.
Since the introduction of the CD platform a lot has changed, but the I²S interface specification didn't. Although there is no international standard for I²S connections, the HDMI connector is very ubiquitous and versatile. Before ordering, please note that not all equipment is compatible! See the table in the Attachments section for more information.
Non EU customer? Tax will be excluded after entering delivery address on checkout.